STEINEL ST 2978 Betriebsanleitung PDF herunterladen (Seite 11)

- 20 - - 21 -

How it works / Basic function

The high-frequency presence

detectors from the Control PRO

range control lighting as well as

heating, ventilation and air-con-

ditioning (COM 2 only), e.g. in of-

fices, WCs, public buildings or at

home, in relation to ambient

light level and the presence of

persons. Modern, high-frequen-

cy technology guarantees that

movement is detected absolute-

ly anywhere irrespective of radi-

ated temperature. Sensing

movement in two directions, the

DUAL HF sensor is ideal for corri-

dors in hotels, schools and office

buildings. The presence detec-

tor's switching outputs and

reach are set at the potentio-

meters and dip switches or by

means of the optional remote

control. Presence Control has

a low intrinsic power consump-

tion.

Presence Control PRO

HF 360 COM 1 / COM 1 AP

DUAL HF COM 1 / COM 1 AP

1 switching output operating

in relation to brightness setting

and presence of persons.

Settings:

- Brightness setting

- Stay-'ON' time, pulse mode,

IQ mode

Presence Control PRO

HF 360 COM 2

1 switching output, such as

COM 1. Plus a 2nd switching

output for HVAC (heating /

ventilation / air conditioning)

governed by presence.

Settings:

- Stay-'ON' time

- Switch-'ON' delay

- Room surveillance

Presence Control PRO

HF 360 DIM

DUAL HF DIM

1 switching output operating

in relation to brightness setting

and presence of persons.

Settings:

- Brightness setting

- Stay-'ON' time, IQ mode

- Orientation light

- Constant lighting control

Detection zone

The reach of the HF 360 is electronically adjustable.

1 or 2 detection directions can be masked out for

adjustment to the room situation. An angle of cov-

erage of 360° provides a max. reach of 8 m.

The DUAL HF sensor has 2 special HF sensors that

detect movement from the ceiling in both direc-

tions. Controlled electronically, reach is infinitely

variable in both directions from 3 x 3 m – 10 x 3 m.

HF 360 mounting height 2.8 m DUAL HF mounting height 2.8 m

쐽 Disconnect the power supply

before attempting any work

on the sensor!

쐽 During installation, the elec-

tric power cable to be con-

nected must be dead. There-

fore, switch 'OFF' the power

first and use a voltage tester

to make sure the wiring is off

circuit.

쐽 Installing the sensor involves

work on the mains power

supply. This work must there-

fore be carried out profes-

sionally in accordance with

the applicable national wir-

ing regulations and electrical

operating conditions (VDE

0100).

쐽 It is only permissible to use

electronic ballasts with isola-

ted control signal at the DIM

1-10 V control output.

System components

 Load module

 Sensor module

 Sensor base

 Dip switches

(1) Normal/test mode

(2) Semi-/fully automatic

mode

(3) Button/switch

(4) 'ON' / 'ON'-'OFF' button

(5) DIM option

Constant lighting control

'ON'/'OFF'

 Twilight setting

 Time setting

Switching output 1

 HVAC stay-'ON' time

Switching output 2

 HVAC switch-'ON' delay

Switching output 2

 Reach setting

 Clamping-type ceiling

adapter, optional

 Surface-mounting adapter

IP 54, optional

 Locking mechanism

 Assembly/Installation

 Parallel-connected

configurations

 Stay-'ON' time

Orientation light

DIM option

 Film shroud for minimising

the detection zone (HF 360).

Assembly/Installation  (see chart on page 2)

The sensor is only intended for

concealed, indoor installation in

ceilings (apart from the COM 1

AP - surface-mounted - option).

A clamping-type ceiling adapter

or surface-mounting adapter is

not included.

Sensor and load module come

ready assembled and must be

plugged together after fitting

the load module and setting the

potentiometers/dip switches.

Accessories:

Clamping-type ceiling adapter,

EAN no.: 4007841 000370

Surface-mounting adapter,

EAN no.: 4007841 000363

Guard cage,

EAN no.: 4007841 003036

Service remote control,

EAN no.: 4007841 000387

User remote control,

EAN no.: 4007841 003012

Operating instructions

Dear Customer,

Congratulation on purchasing

your new STEINEL presence de-

tector and thank you for the

confidence you have shown in

us. You have chosen a high-qual-

ity product that has been manu-

factured, tested and packed with

the greatest care.

Please familiarise yourself with

these instructions before at-

tempting to install the presence

detector because prolonged, re-

liable and trouble-free operation

will only be ensured if it is fitted

and used properly.

We hope your new STEINEL

sensor will bring you lasting

pleasure.

Safety warnings

PC PRO HF360_DualHF_Zentraleuropa.indd 20-21PC PRO HF360_DualHF_Zentraleuropa.indd 20-21 11.09.13 10:3811.09.13 10:38

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 74 75

Kommentare zu diesen Handbüchern

Keine Kommentare

STEINEL ST 2978 Betriebsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Bewegungsmelder STEINEL ST 2978